Zur Einstellung der Nullage werden zunächst die Be-
festigungsschrauben der Nulllageneinstellung über-
prüft. Danach wird der Türfl ügel im gewünschten Winkel
ausgerichtet und die Schrauben wechselseitig auf das max.
Anzugsmoment von 5 N·m festgezogen.
to adjust the closed position, fi rst make sure that
the set screws of the closed position adjustment
are loose. then the door panel is positioned to the desired
angle and the screws are tightened alternately to the max.
tightening torque of 5 N·m.
5
2x pro Band,
max. 5 N·m
2x per hinge,
max. 5 N·m