HERON 8896140 Bersetzung Der Ursprünglichen Bedienungsanleitung Seite 124

device, the year of manufacture of the electrical
device and the type of electrical device (compres-
sor with a pressure vessel, etc.) and the number of
intended electrical devices that are to be powered
from the generator, since the power inputs of the
individual electrical devices are added up. The deci-
ding factor for the use of an electrical device with
a power input that is approaching the electrical
power output value of the generator should be the
soft start function on the electrical device, which
ensures a slower ramp up of the electric motor
and thereby reduces the current spike that would
otherwise not enable the given electrical device to
be used with the intended generator with a lower
electrical power output.
y Before purchasing a generator or connecting an
electrical device/s to the generator, to get a gene-
ral ideal, first use a standard wattmeter (device
for measuring electrical power consumption) both
during the start up of the electrical device as well
as when placed under the expected load from the
mains power grid (see table 3 and 4) and if possible,
check the use of this electrical device/s on a sample
of the generator being considered, since a wattme-
ter may not necessarily be able to capture the peak
current ramp-up the duration of which is less than
a second.
y In table 3, there is a drawn up overview of the power
inputs of angle grinders with a cutting disc diameter
from 115 mm to 230 mm with the use of tools of the
provided specification according to the determined pur-
pose of use of the angle grinders and requirements for
the minimum electrical power output of the generators.
EN
Note:
y Tables 3 and 4 refer to the digital inverter generators
HERON® 8896216 and HERON® 8896217, which are not
part of our offer. The only reason why they are included
is that the described tests were performed on them
and they cannot be entirely compared to the respective
available models HERON® 8896218 and HERON® 8896219
for the following reasons. The current mode HERON®
8896218 (900 W/Max. 1 100 W) is equipped with better
electronics than model HERON® 8896216 and handles
loads better at full operating power output than the
original model HERON® 8896216. The current model
HERON® 8896219 (1850 W/Max. 2000 W) has compared
to the original model HERON® 8896217 (1 600 W/max.
2000 W) a higher electrical operating power output. The
described digital generator models HERON® 8896216
and HERON® 8896217 thus better express the required
minimum electrical power output for the given load.
124