Key Function; Setting Mode - Velleman PEREL WC224 Bedienungsanleitung

Following is a table of barrier vs. reception factor as a guide.
6. Settings
6.1
TEMP.
WIND +
PRESSURE -
ALARM
MAX/MIN
LIGHT/SNOOZE
Notes:
•
Press WIND + and PRESSURE – simultaneously to reset the weather station and
clear all records. All user settings will return to default.
•
Press TEMP. to skip the RF signal reception.
•
In setting mode, press WIND + or PRESSURE – to set the value.
•
Press LIGHT/SNOOZE or wait 30 seconds to exit the setting mode.
6.2
Hold SET pressed for 2 seconds to enter the setting mode. The basic settings can now
be performed in following order.
Beep
Press WIND + or PRESSURE – to select on (beep at every key press) or off (beep off).
V. 02 – 04/06/2020
Barrier
glass
plastics
wood
brick
concrete
metal

Key Function

Key
•
SET Hold this key to enter the setting mode.
•
Press this key to view wind chill, heat index and dew point
temperature.
•
Press this key to view rain rate, event, rain day, rain week, rain
month and rain total.
RAIN
•
Hold this key pressed for 2 seconds to reset the current
displayed rain value.
•
Press this key to view wind/gust and wind direction.
•
Press this key to view the absolute pressure average of 12 h,
24 h, 48 h and 72 h.
•
Hold this key pressed for 2 seconds to view the absolute and
relative pressure.
•
Press this key to view the alarm value of temperature/humidity/
rain rate/rain day/wind.
•
Press this key to view the max/min value of temperature/
humidity/rain rate/rain day/wind/UVI/light/absolute pressure.
•
Press this key to adjust the LCD brightness.
•
Hold this key pressed to register a new transmitter.

Setting Mode

WC224
Description
7
Signal Reduction
5-15 %
10-15 %
10-40 %
10-40 %
40-80 %
90-100 %
©Velleman nv