maquet Betamaquet 1140 Serie Wartungs- Und Reparaturanleitung Seite 3

Wartungs- und Reparaturanleitung
Maintenance and Repair Instructions
MAQUET products are subject to maintenance within an annual interval.
(app. 200 ... 300 hours of equipment operation)
Damaged or defective parts are to be replaced as per this maintenance
and repair instructions.
Repair work may require special tools and mounting devices.
Maintenance or repair work is only to be carried out by MAQUET AG
or other service personnel licensed by MAQUET
For adjusting the IR-Code use „Technical Description of the corresponding
operating table.
For troubleshooting use „Test instruction" 9491.0354 .for hydr. O.R. tables.
Table of contents
Generals
1. Repair word for operating table tops
1.1 Universal taple top 1140.10
1.2 Bowden cable for longitudinal shift and trendelenburg cradle
1.3 Gas-loaded spring in the right-hand rail
1.4 Joint clamp
1.5 Setting the eccentric lever at the leg plates
1.6 Repair word for the extension table top 1140.20
1.7 Replacing the traction bar
1.8 Replacing the slide washers at hinge A
1.9 Replacing the slide washers at hinge B
1.10 Adjusting the locking nut
1.11 Replacing the PU padding - at the leg plates
1.12 Adjusting the clamping mechanism at the leg plates
2. General repair informationfor all operating table tops
2.1 Replacing the locking pawls
2.2 Adjusting the eccentric lever
2.3 Table top pades (PU)
2.4 Table tops padding (Lectrolite)
2.5 Adjusting the eccentric lever at the head rest
9490.6154 03
General
11.01.01
BETAMAQUET
1140.
Page
0.01 -
1.01 -
1.02
1.02
1.04
1.10
1.12
1.14
1.14
1.14
1.16
1.18
1.20
1.20
2.01 -
2.02
2.02
2.04
2.06
2.06
0.02
Seite/Page: