Herunterladen Inhalt Inhalt Diese Seite drucken

Polster Für Lagerfläche (Pu); Polster Für Lagerfläche (Lectrolite); Table Top Pades (Pu); Table Tops Padding (Lectrolite) - maquet Betamaquet 1140 Serie Wartungs- Und Reparaturanleitung

Inhaltsverzeichnis

Werbung

Wartungs- und Reparaturanleitung
Maintenance and Repair Instructions
2.3.
Polster für Lagerfläche (PU)
Die integralgeschäumten Lagerflächenpolster (1); (Sitzplattenpolster (2), Rückenplattenpolster (3))
sind mit lösbaren Schnappverbindungen von oben auf die Chromnickelstahlholme aufgeklipst.
Abnehmen:
Mit beiden Händen um eine Polsterquerkante fassen und nach oben ziehen.
Anbringen:
Polster auf Schnappverbindung legen und mit leichtem Druck aufschnappen lassen.
2.4.
Polster für Lagerfläche (Lectrolite)
Das einteilige Lagerflächenpolster (4) ist mit Klettverschluß auf den Lagerflächenplatten,
Sitzplatte (5) und Rückenplatten (6,7) befestigt.
Anbringen:
Auf richtige Lage des Klettverschlußes achten und das Polster auflegen.
Die einzelnen Lagerflächenplatten sind mit lösbaren Schnappverbindungen von oben
auf die Chromnickelstahlholme aufgeklipst.
Lagerflächenplatte auf Schnappverbindung legen und mit leichtem Druck aufschnappen lassen.
Abnehmen:
Mit beiden Händen auf eine Lagerflächenquerkante fassen und nach oben ziehen,
2.3.
Table top pads (PU)
The integrated foam table top pads (1) seat plate pads (2), and back plate pads (3) are clipped to
the chrome-nickel steel rails from above by means of snap-type connectors.
Removal:
Grip one end of the pad with both hands and pull upward.
Attachment:
Position the pad on the clips and seat by applying moderate pressure.
2.4.
Table top padding (Lectrolite)
The one-piece table top pad (4) is attached to the table top segments, seat plate (5) and back plates (6,7)
by means of Velcro straps.
Attachment:
Check to make sure that the Velcro strap is positioned properly and then position the pad.
The individual table top plates are clipped to the chrome-nickel steel rails from above by means of
snap-type connectors.
Reattach by positioning the table top plates on the clip fasteners and applying moderate pressure
until they snap in place.
Removal:
Grasp one end of the table top segments with both hands and pull upwards.
9490.7124DEGB
11.01.01
BETAMAQUET
1140.
2.04
Seite/Page:

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis