Troubleshooting - Yard Force SA650ECO Originalbetriebsanleitung

GB
CLEANING/MAINTENANCE
Short-time storage
• Store the machine in a dry place well out of reach of children.
• Do not wrap nylon sacks around the machine, as this could result in the formation of
moisture.
52

TROUBLESHOOTING

Troubleshooting for the docking station
LED
1 Blue light on Normal
2 Blue flash, Red off Docking station internal error, boundary wire OK
Docking station OK; boundary wire connection is poor or the
3 Red flash, Blue off
Robotic Mower is charging.
Docking station internal error; boundary wire connection is poor or
4 Red and Blue flash
broken
Troubleshooting for the Robotic Mower
Nr. Message Symptom
Robotic Mower
1 NONE cannot dock with
docking station
Robotic Mower runs in
circles while mowing or
2 NONE while following boundary
wire back to docking
station.
The Robotic Mower is
3 NONE
very noisy.
Mower remains at or
returns to docking
4 NONE station when pressing
START and closing the
lid.
5 Lift-sensor triggered
LED flash
Description
Action
1. Check if boundary wire under and in front of
the charger is in a straight line.
2. Check that the docking station's position is
suitable as explained in this manual.
1. Verify that no power cable runs parallel and
in close proximity the boundary wire. If
necessary, reposition the boundary wire.
2. Check if a front wheel is stuck.
3. If a neighbor has a similar Robotic Mower, the
signals may interfere. Try setting your docking
station and Robotic Mower to the alternative
boundary signal.
4. Driving motor may be damaged, please
contact customer support
1. Inspect the blade fixing screws; tighten if
necessary.
2. Inspect the blades for damage; replace if
necessary.
3. Grass too high. Increase cutting height.
Alternatively, mow the lawn with an ordinary
lawnmower firstly, choosing a cutting height
just above the desired cutting height.
4. Cutting motor failure, please call after sales
service
1. Check if the mower already completed the
programmed working time for that day.
2. Check if the battery is very low
1. Too-high and dense grass (taller than 60
mm) may cause the Robotic Mower to lift.
Mow the lawn with an ordinary lawnmower.
2. Check the mower is free from obstructions.
53
GB