Cleaning/Maintenance; Cleaning And Maintenance - Yard Force SA650ECO Originalbetriebsanleitung

GB

CLEANING/MAINTENANCE

Work that has not been described in these instructions must be carried out by a
servicing agency authorised by the manufacturer. Only use original parts.
Maintenance
Check and clean your Robotic Mower regularly and replace worn parts if necessary.
Preferably use a dry brush, a damp cloth or a sharpened wooden piece.
Never use flushing water.
Following these maintenance instructions can extend your Robotic Mower's service life.
Battery Life
The Robotic Mower has a maintenance free Li-ion battery, with an estimated life of more than
2 years (depending on treatment and usage).
Winter Storage
During winter, keep your mower, docking station and power supply in a dry place.
We recommend a shed, garage or preferably store it indoors.
Prepare your device for winter storage as follows:
1. Fully recharge the battery.
2. Set the main power switch to "OFF".
3. Thoroughly clean your Robotic Mower.
4. Unplug the power supply from the mains outlet.
5. Disconnect the power supply from the docking station.
6. Disconnect the boundary wire from the docking station. Lift up the docking station, and
clean it. The boundary wire can remain outside. However, it is imperative to protect the
wire against corrosion. We recommend a water-free grease or suitable sealing tape.
If available, repack the product in the original packaging.
Alternatively, our service centre offers a winter service for your device. This will include a
check-up of all parts and - if available - a software upgrade.
48
CLEANING/MAINTENANCE
Preparing for spring
After winter storage, please clean the charging contacts on both the Robotic Mower and the
docking station.
Use a fine abrasion paper or a brass brush; this will help to achieve the best charging
efficiency and avoid any charging interference.

Cleaning and Maintenance

It's important to keep your Robotic Mower clean.
The mower will deal with slopes easier when the wheels are clean. Sharp cutting blades need
less power and will result in cleaner cuts.
Remember to turn off the main power switch (11) before starting any maintenance. Use
protective gloves when handling the blades! Never use a high pressure washer, garden hose
or running water when cleaning the device.
Cleaning the mower body
As your Robotic Mower is battery powered you need take care when cleaning. Remove rough
dirt with a soft brush. Use a manual water spray with mild household detergent for intensive
cleaning. Wipe off any residue after cleaning with a moist rag.
49
GB