SMA Sunny Tripower 8000TL Austauschanleitung Seite 17

SMA Solar Technology AG
2. Release all 4 screws of the DC protective cover
using an Allen key (AF 3) and remove the DC
protective cover.
3. Disconnect the cable connections:
• Remove all cables connected to the assembly
of the EMC filtering device on the string-fuse
assembly.
• Remove the 8-pole plug on the assembly of the
EMC filtering device.
4. Remove the disconnected cables:
• Pry the cable glands out sideways using a flat-
blade screwdriver.
Replacement Manual
6 Removing the DC Assembly
DCCON-STPTL10-RM-xx-10 17