Philips HI838 Gebrauchsanweisung Seite 10

How to change the cassette
- Purchase a replacement cassette
(type HD 1900) from your dealer or the nearest
Philips service centre.
25
- Push the cassette release button (K) and take
out the cassette (fig. 25).
- Empty the water from the watertank and
cassette housing (fig. 26).
- Write the date on the new cassette and insert it
into the iron stand.
- Fill the watertank with water.
- Set steam control in position 4 and temperature
control to 3.
- Push steam trigger for about one minute. The
new cassette is now filled with water.
- You can resume ironing.
Cleaning
- Before cleaning remove the mains plug from
the wall socket and allow the iron to cool down
sufficiently.
- Scale and other deposit can be wiped off the
soleplate with a damp cloth and some non-
scratching (fluid) abrasive.
• Keep the soleplate smooth: avoid hard
contact with metal objects.
- The upper part of the appliance can be cleaned
with a damp cloth.
- From time to time clean the inside of the
watertank by filling it with water and shaking.
Then pour the water back out.
26
Storage
- Remove the mains
plug from the wall
socket.
- Pour any remaining
water out of the
watertank (fig. 27).
- Set the steam control
to position 4.
- Put the iron on the
rubber mat on its
stand and let it cool down sufficiently before you
store it.
- Regularly check if the mains cord is still in a
good and safe condition.
Environment
• Do not throw the
appliance away with
the normal household
waste at the end of its
life, but hand it in at an
official collection point
for recycling. By doing
this you will help to
preserve the
environment (fig. 28).
Products bought in Canada
For guarantee conditions on products bought in
Canada see separate purchase card.
10
27
28