Spare Parts And Accessories; Disposal; Disposing Of Kombimotor; Ec Declaration Of Conformity - Stihl KMA 130 R Gebrauchsanleitung

20 Spare Parts and Accessories

STIHL FS-KM
The KombiEngine can be used together with the STIHL FS-
KM with the following cutting attachments:
Mowing head with mowing line "round, quiet" with diameter
2.4 mm:
– Mowing head AutoCut 25-2
– Mowing head AutoCut C 26-2
– Mowing head DuroCut 20-2
– Mowing head FixCut 31-2
– SuperCut mowing head 20-2
– Mowing head TrimCut 31-2
Mowing head with mowing line "round, quiet" with diameter
2.7 mm:
– Mowing head AutoCut 36-2
Metal cutting attachments:
– Grass cutting blade 230-2
– Grass cutting blade 230-4
– Grass cutting blade 230-8
– Grass cutting blade 260-2
– Brush knife, 250-3
Guards, handles and support systems which must be used
with the cutting attachments mentioned are specified in the
STIHL FS-KM Instruction Manual.
20 Spare Parts and Accessories
20.1 Spare Parts and Accessories
These symbols identify original STIHL
replacement parts and original STIHL
accessories.
0458-805-9821-B
STIHL recommends the use of original STIHL replacement
parts and accessories.
Original STIHL replacement parts and original STIHL
accessories are available from STIHL servicing dealers.

21 Disposal

21.1 Disposing of KombiMotor

Information on disposal is available from STIHL servicing
dealers.
► Dispose of the KombiMotor, accessories and packaging in
accordance with local regulations and environmental
requirements.

22 EC Declaration of Conformity

22.1 STIHL KMA 130 R KombiMotor

ANDREAS STIHL AG & Co. KG
Badstrasse 115
D-71336 Waiblingen
Germany
declare in exclusive responsibility that
– Category: Cordless KombiMotor
– Make: STIHL
– Model: KMA 130 R
– Serial identification: 4867
conforms to the relevant provisions of Directives
2011/65/EU, 2006/42/EC, 2014/30/EU and 2000/14/EC and
has been developed and manufactured in conjunction with
the KombiTools listed in this instruction manual to comply
with the following standards in the versions valid on the date
of production: EN 55014-1, EN 55014-2, EN 60335-1,
EN 60745-1 and EN ISO 12100 taking into account the
standards EN 60335-2-72, EN 50636-2-91,
EN 50636-2-100, EN 60745-2-13 and EN 60745-2-15.
English
47