OPERATION
Safety
1.3
Units of measurement
Note
All measurements are given in mm unless stated oth-
erwise.
2.
Safety
2.1
Intended use
This product is intended for operation with an open vented
(non-pressurised) mini instantaneous water heater.
This product is designed for domestic use. It can be used safely by
untrained persons. The appliance can also be used in a non-do-
mestic environment, e.g. in a small business, as long as it is used
in the same way.
Any other use beyond that described shall be deemed inappro-
priate. Observation of these instructions is also part of the correct
use of this appliance.
2.2
General safety instructions
WARNING Burns
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
There is a risk of scalding at outlet temperatures in ex-
cess of 43 °C.
Material losses
!
Whilst the water in the instantaneous water heater is
being heated, expansion water will drip from the spout.
Scale build-up can block the spout and thus subject the
instantaneous water heater to pressure.
f Never block the spout and only use the original aer-
f
ator.
www.stiebel-eltron.com
3.
Operation
MAE
To draw water, lift the lever.
To achieve the required temperature, mix the cold and hot water
by moving the lever sideways.
MAZ
4
1 Swivelling spout
2 Aerator inside the fitting
3 Draw-off valve cold
4 Draw-off valve hot
MAW
4
1 Draw-off valve hot
2 Swivelling spout
3 Aerator inside the fitting
4 Draw-off valve cold
4.
Cleaning and care
f Never use abrasive or corrosive cleaning agents. A damp
f
cloth is sufficient for cleaning and caring for the product.
f For descaling, remove the aerator from the fitting.
f
1
2
3
1
2
3
MAE | MAZ | MAW |
11