Safety; Operation; Cleaning And Care; General Safety Instructions - STIEBEL ELTRON Wst Bedienung Und Installation

operaTIon | InSTallaTIon

operation

3. operation
Note
When the water in the water heater is being heated, ex-
pansion water will drip from the outlet.
With non-pressurised water heaters with anti-drip func-
tion, the expansion water remains inside the water heat-
er.
4
1 Swivelling spout
2 Aerator inside the fitting
3 Draw-off valve
4 Temperature regulating tap head
4.

cleaning and care

f Never use abrasive or corrosive cleaning agents. A damp f
cloth is sufficient for cleaning and caring for the product.
f For descaling, remove the aerator from the fitting. f
www.stiebel-eltron.com
InSTallaTIon
5.

safety

Only qualified contractors should carry out installation, commis-
sioning as well as maintenance and repair of the product.
5.1

general safety instructions

We guarantee trouble-free function and operational reliability
1
only if the original accessories and spare parts intended for the
appliance are used.
2
WARNING Burns
3
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
Material damage
!
Scale build-up can block the outlet and thus subject the
water heater to pressure.
f Never block the spout, and use only aerators for
5.2

instructions, standards and regulations

Note
Observe all applicable national and regional regulations
and instructions.
f
non-pressurised taps, otherwise the water heater
could be damaged.
WST | WUT | 9