P R E V E N T I N G WAT E R
L E A K S
The water tank may leak if not placed
properly on the base.
•
Make sure the silicone ring around the
water tank cap is secured at all times.
[Figure 6.1]
•
Twist and secure the cap tightly onto
the water tank.
[Figure 6.2]
Note: A small gap between the cap
and the tank is normal.
•
Before moving the humidifier, remove
the tank from the base and empty any
excess water from the inner chamber.
•
Wipe off any excess water on the top
and bottom of the base.
•
Do not shake the humidifier or place
it on an inclined surface. Make sure
to place the humidifier on a flat, level
surface.
[Figure 6.3]
Figure 6.3
Figure 6.1
Figure 6.2
EN
13