BAW M18MI-BLC50B-S04G
Inductive Distance Sensor
6
Startup and operation
6.1
Startup
DANGER
Uncontrolled system movement
When starting up, if the sensor is part of a closed loop
system whose parameters have not yet been set, the
system may perform uncontrolled movements. This
could result in personal injury and equipment damage.
► Persons must keep away from the system's
hazardous zones.
► Startup must be performed only by trained technical
personnel.
► Observe the safety instructions of the equipment or
system manufacturer.
1. Check connections for tightness and correct polarity.
Replace damaged connections.
2. Turn on the system.
3. Check measured values and adjustable parameters
and readjust the sensor if necessary.
Check for the correct values at the null point and
end point, especially after replacing the sensor or
after repair by the manufacturer.
6.2
Operating notes
–
Regularly check function of the sensor and all
associated components.
–
Take the sensor out of service whenever there is a
malfunction.
–
Secure the system against unauthorized use.
6.3
Maintenance
The product is maintenance-free.
www.balluff.com
english
9