Before First Use; Assembly Of The Cordless Sweeper - Silvercrest SABD 3.7 LI D3 Bedienungsanleitung

WARNING! RISK OF INJURY!
This product contains rechargeable batteries . Do not throw the batteries
►
into a fire and do not subject them to high temperatures . There is a
risk of explosion!
Do not use the appliance as a toy .
►
Never leave children unsupervised in the vicinity of the appliance!
►
ATTENTION! PROPERTY DAMAGE!
Only charge the appliance with the mains adapter/charger supplied
►
(Type GPE003W-053050-3)!
Only this cordless sweeper may be charged with the supplied battery
►
charger; the charger is not suitable for other batteries .
Never attempt to recharge non-rechargeable batteries .
►

Before first use

■ Remove the packaging material from the appli-
ance including the plastic cap 8, which safe-
guards the on/off switch 6 from unintentional
pressure during transport .

Assembly of the cordless sweeper

■ Attach the handle 2:
–
Fit the 3 handle elements 2 together by
pushing the push-in connection into the
handle . Press the knob 4 on the push-in
connection inwards and push it into the
handle so that the head 4 engages in
the recess on the handle 5 . The handle
elements are now firmly fixed together
(see Figure B on the foldout page) .
–
Push the assembled handle 2 with the push-
in connection into the holder 3 on the appli-
ance and rotate the handle until it engages .
■ Fitting the dirt container 0 on the appliance:
■ 4 │ GB │ IE │ NI │ CY
SABD 3.7 LI D3