Troubleshooting; General; Maintenance Data - Atag OX6411EL Betriebsanleitung

TROUBLESHOOTING

General

Problem
The appliance does not work
at all.
The appliance does not work
at all.
The appliance does not work
at all.
The oven lamp does not light.
Steam and condensation collect
on the food and in the oven.

Maintenance data

If you cannot fix the problem yourself, contact your dealer or customer service.
The contact details for the service centre are shown on the type plate. The type plate is located
inside the appliance.
We recommend that you copy the details here:
Model (MOD.)
Product number (PNC)
Serial number (S.N.)
Possible cause
The appliance is not switched
on.
The Kitchen Timer + End
Preparation Time are not set.
The fuse is burnt out.
The oven lamp is burnt out.
The food has been left in the
oven too long.
.........................................
.........................................
.........................................
Solution
Switch on the appliance. Refer
to chapter 'Daily use'.
Set the Kitchen Timer + End
Preparation Time. See chapter
'Clock functions'.
Check the fuse. If the fuse
blows more than once, consult a
competent electrician.
Replace the oven lamp.
Do not leave food in the oven for
more than 15-20 minutes after
preparation.
EN 21