Clock Functions; Additional Functions; Handy Suggestions And Tricks - Atag OX6411EL Betriebsanleitung

DAILY USE

Clock functions

Timer - Programming end time
Sets the time after which you want the oven to switch off automatically.
1. Set an oven function and the temperature.
2. Turn the timer knob all the way to the stop and then back to the desired time.
3. When the set time has elapsed you will hear a sound signal. The appliance is switched off.
Manual operation
: Turn the timer knob to 'Manual operation'. In this mode you can operate
the device manually. The timer function is off.

Additional functions

Cooling fan
When the appliance is in operation, the cooling fan is turned on automatically to keep it cool.
After the appliance is switched off, the fan continues to run until the appliance is cool.
Safety thermostat
Incorrect operation of the appliance or defective components can result in dangerous
overheating. To prevent this the oven has a safety thermostat which interrupts the power supply.
The oven activates again automatically once the temperature has dropped.

Handy suggestions and tricks

Inside of the door
On certain models you will find the following on the inside of the door:
• The numbers of the shelf levels.
• Information about the heating functions and temperatures for common dishes.
The temperatures and baking times in the tables are only intended as a guide. These
depend on the recipes and the quality and quantity of the ingredients used.
EN 9