Connecting Your Smartphone With The Roc Using The App; Using The App - BWT bestaqua 14ROC Einbau- Und Bedienungsanleitung

24

3.5.2 Connecting your smartphone with the ROC using the app

Select the device from the
list (in this case: 14ROC with the ID number
A4:34:F1:AA:F2:00). If multiple devices
are present, select the unit num-
ber which corresponds with the
14ROC serial number.
Please attach a screenshot to the
log!

3.5.3 Using the app

bestaqua 14ROC
working
When the consumer is draw-
ing permeate, the app shows
the status "working" with a
blue spinning circle. The reverse
osmosis unit now produces
permeate water.
bestaqua 14ROC
Connecting ...
Once the RO unit is selected, the
screen below will be displayed.
The LED on the front of the
bestaqua 14ROC will light up blue.
bestaqua 14ROC
bestaqua 14ROC
working
012
uS
CONDUCTIVITY
2.5
bar
OUTLET PRESS
01560
liter
INLET WATER
03340
liter
OUTLET WATER
info
During operation, this screen can
be displayed to the customer
when the "working" button
is pressed. The system data is
displayed as follows.
Conductivity in TDS or µS
f
(configurable in the menu)
Temperature of the feed-
f
water
Output pressure in bar
f
Running time in days
f
Amount of water at the
f
infeed
Pump running time in hours
f
Amount of permeate pro-
f
duced
Permeate flow rate
f
bestaqua 14ROC
Once a connection to the device
has been established, the screen
below will be displayed. The
device is ready for permeate pro-
duction. The app shows "ready".
18
C°
H 0 TEMP
2
186
DAYS
0016
hours
PUMP ON
095
liter/hour
OUTLET FLOW
back
After the consumer stops drawing
permeate or if the atmospheric
tank is full, the system flushes
the membranes with raw water
(approx. the bed volume of the cartridge). If no
permeate is drawn, the system
flushes with feedwater every
3 hours.
ready
bestaqua 14ROC
rinsing