Safety; Intended Use - Wika Cs4S Betriebsanleitung

1. General information / 2. Safety
Information
... points out useful tips, recommendations and information for efficient and
trouble-free operation.
DANGER!
...identifies hazards caused by electric power. Should the safety instructions
not be observed, there is a risk of serious or fatal injury.

2. Safety

WARNING!
Before installation, commissioning and operation, ensure that the appropriate
temperature controller has been selected in terms of measuring range, design
and specific measuring conditions.
Non-observance can result in serious injury and/or damage to the equipment.
WARNING
This is class A equipment for emissions and is intended for use in industrial
environments. In other environments, e.g. residential or commercial
installations, it can interfere with other equipment under certain conditions.
In such circumstances the operator is expected to take the appropriate
measures.
Further important safety instructions can be found in the individual chapters of
these operating instructions.

2.1 Intended use

The model CS4S is a compact digital temperature controller for the display, control and
monitoring of temperature. This controller has been designed for mounting into control
panels.
The instrument has been designed and built solely for the intended use described here,
and may only be used accordingly.
The technical specifications contained in these operating instructions must be observed.
Improper handling or operation of the instrument outside of its technical specifications
requires the instrument to be taken out of service immediately and inspected by an
authorised WIKA service engineer.
WIKA operating instructions model CS4S
!
GB
5