Starting Operation - Bosch Ixo Originalbetriebsanleitung

OBJ_BUCH-826-002.book Page 41 Tuesday, October 14, 2008 4:54 PM
Operation

Starting Operation

Reversing the Rotational Direction
The rotational direction switch 9 is used to reverse the ro-
tational direction of the machine. However, this is not
possible with the On/Off switch 8 actuated.
Right rotation: For driving in screws, push the rotational
direction switch 9 left to the stop.
The indicator for right rotation 4 lights up when
the On/Off switch 8 is actuated and the motor is
running.
Left Rotation: For loosening or unscrewing screws, push
the rotational direction switch 9 right to the stop.
The indicator for left rotation 6 lights up when the
On/Off switch 8 is actuated and the motor is run-
ning.
Switching On and Off
To start the machine, press the On/Off switch 8 and keep
it pressed.
The light 10 is lit when the On/Off switch 8 is slightly or
completely pressed in and permits to light the work area
when the lighting conditions are bad.
To switch off the machine, release the On/Off switch 8.
Bosch Power Tools
English | 41
2 609 932 675 | (14.10.08)