Battery Installation; Operation - Baxtran SW Anleitung

SW
1 INTRODUCTION
▪ Loaded measurement component equipped with high accuracy load-cell.
▪ Large liquid crystal display .
▪ Operating temperature: 15-30ºC
▪ Quick display of weight.
▪ Auto power off to conserve battery power.
▪ Auto calibration via keypad.
▪ TARE function.
▪ Low battery indication.
▪ Overload indication.
▪ Multi-function on weighing and parts counting.

2 BATTERY INSTALLATION

Battery specification: C size (LR14) x 3 pieces not included.
Installation procedure:
1. Remove battery cover from the compartment under the scale.
1. Install batteries with correct polarity.
1. Close battery cover.

3 OPERATION

3.1 KEYPAD FUNCTIONS
6
Press this key to turn the scale on and off.
When the scale is turned on, LCD shows as figure below and auto zero
after 3 seconds.
Use this key to switch the weight unit such as kg, lb, oz or pcs.
1. Press this key to proceed tare & zero function when power is on. (You
can use tare function to eliminate container weight, then you can net
weight when a container is used)
1. When power is off, press this key for 3 seconds to go into calibration
procedure.
Counting function:
1. When the power is on, press
1. Press to select sample size of 10, 20, 50, 100 and 200 pieces. * The
larger the sample size, the more accurate unit weight registered.
1. Based on the size selected, place the selected number of sample pieces
on the platform.
to select unit in "pcs" .
ES / EN ES / EN /FR / IT / DE /FR / IT / DE