Operating Pinstop; Using Trolley Without Pinstop; Using Removable Endstop; Rescue Plan - Harken Industrial R27 Handbuch

Operating pinstop

Rotate the lever upwards to disengage the pinstop.
To lock it out continue rotating until the lever
is on it's back. Trolley will roll freely. To secure trolley,
position pinstop over rail hole and rotate lever
so pin drops into hole.
WARNING!
When using the trolley with pinstop on a
wall or ceiling mounted rail not properly
horizontal installed and the pinstop is
in the un-locked position, pay attention
because in the event of a fall the trolley
will slide without impediments.
Using trolley without pinstop (IN10615, IN10615.CLEAR, IN9608, IN9608.CLEAR, IN10567, IN10567.CLEAR,
IN158 and IN158.CLEAR)
WARNING!
When using the IN10615, IN10615.CLEAR, IN9608, IN9608.CLEAR, IN10567, IN10567.CLEAR,
IN158 and IN158.CLEAR trolley on a wall or ceiling mounted rail not properly horizontal installed,
pay attention because in the event of a fall the trolley will slide without impediments.

Using removable endstop

If using IN1642.CLEAR removable endstop, always be
sure the pinstop is inserted into one of the stop holes in
the rail. The bottom of the knob must be nearly flush
with the body of the endstop.
WARNING!
Always be sure the pinstop is securely
fastened to a pinstop hole in the rail.
Failure to seat in a pinstop hole
can result in a fall which could result in
severe injury or death.
Resque plan
When using this equipment, the employer must have a rescue plan and the means at hand to implement it.
The plan must be communicated to authorized persons and rescuers. The system and trolley integrity MUST be
assessed prior to any rescue for the safest and quickest recovery.
24/07/20
Lock out
IN1642.CLEAR
endstop
ENGLISH
Secure
CORRECT
INCORRECT
13