Medi сircaid PAC band Gebrauchsanleitungen Seite 4

English
When bands are placed correctly
they should slightly overlap,
leaving no space between bands.
Do not tuck bands. The Velcro tabs
should never touch the skin!
Donning
The circaid power added compres-
sion band (pac band) is designed
to provide additional compression
to the foot, targeting the arch and
ankle area regions.
For complete compression of the
foot, it is recommended to apply
the cicaid power added compres-
sion band over the circaid
compression anklet.
Step 1: Lay the pac band, out flat.
If using on the left foot, the care
instructions and illustration
should be visible (2a). If using on
the right foot, no text should be
visible (2b).
Step 2: Center the arch of the foot
as shown in the illustration
printed on the band. (3a) shows
the left foot. (3b) shows the right
foot. Wrap the short arch band
over the top of the foot (4).
Step 3: Secure the long arch band
over the top of the foot with the
large hook tab (5a-b).
Step 4: Pull the ankle band around
the back of the ankle and secure it
with the small hook tab to a firm
but comfortable compression
(6a-c).
Note:
If excess material or overlap is a
concern, either the long arch band
(7) or the ankle band (8) may be
trimmed as needed. Be careful not
to over-trim the bands.
Doffing instructions
Disengage the hook tabs and fold
each band back onto the body of
the pac band. Do not roll the
bands too tightly as this will cause
the hook material to bend,
reducing its adherence strength.