Spray Function; Steam Boost Function - Philips GC4444 Bedienungsanleitung

 If you have been steam ironing, empty the water tank.
 Let the iron cool down in a safe place.
Features

Spray function

You can use the spray function at any temperature to moisten the article
to be ironed. This helps remove stubborn creases.
1 Make sure that there is enough water in the water tank.
 Press the spray button several times to moisten the article to be
ironed (Fig. 10).

Steam boost function

A steam boost from the special Steam Tip soleplate helps remove
stubborn creases. The steam boost enhances the distribution of steam
into every part of your garment.
The steam boost function can only be used at temperature settings
between 3 and MAX.
1 Press and release the steam boost button (Fig. 11).
Vertical steam boost
1 You can also use the steam boost function when you hold the iron
in vertical position (Fig. 12).
This is useful for removing creases from hanging clothes, curtains etc.
Never direct the steam at people.
Drip stop
This iron is equipped with a drip-stop function: the iron automatically
stops producing steam when the temperature is too low, to prevent
water from dripping out of the soleplate. When this happens, you may
hear a sound.
EnGlISh
11