Maintenance; Maintenance Plan; Cleaning The Air Filter - Zipper Maschinen ZI-RPE160C Betriebsanleitung

16

MAINTENANCE

No cleaning, upkeep, checks or maintenance when machine is
running
Be safe: Shut off the machine, let it cool down, disconnect spark plug cap
from spark plug.
The machine does not require intense maintenance. However, to ensure a long lifespan, we strongly
recommend following the upkeep and maintenance plan.
Repairs must be carried out by specialists! Use original ZIPPER parts only!
Only a properly maintained equipment may be a satisfactory tool. Care and maintenance
deficiencies can cause unpredictable accidents and injuries.
Repairs should be performed only by authorized service centers.
Improper operation may damage the equipment or endanger your safety.

16.1 Maintenance plan

Controls for the maintenance of the machine
Loose or lost screws, nuts, bolts
Damage of any part of the machine
Fuel level
Fuel tank of tightness
Oil level
Tension of the V-belt
Machine cleaning
Cleaning spark plug
Cleaning air filter

16.1.1 Cleaning the air filter

A clogged air filter reduces the engines power output drastically and causes engine disfunction.
Furthermore it reduces the engines lifespan!
Disassemble the air filter cap. Remove the air filter from the machine. Clean the air filter and drip
some drops of oil onto the filter. Mount the filter back.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE160C
ATTENTION
N O T I C E
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly prior to each operation
Regularly after operation
Every 25 working hours
Every 20-30 working hours
MAINTENANCE
29