Assembly - Zipper Maschinen ZI-RPE160C Betriebsanleitung

14

ASSEMBLY

Please check the product contents immediately after receipt for any eventual transport damage or
missing parts. Claims from transport damage or missing parts must be placed immediately after
initial machine receipt and unpacking before putting the machine into operation. Please understand
that later claims cannot be accepted anymore.
14.1 Assembly
Handle bar:
Make the handlebar end slots into the
channel provided by engine deck and
secure with M10X25 hex bolts, spring
washers and flat washers.
Moving device:
Loosen the bolt
Place the moving device
ito the bracket and
replace the bolt.
Fix the bolt with the
splint.
Rubber mat:
The rubber mat allows to compact
concrete slabs, stones, bricks and blocks
silently and gently.
Attach the paving pad onto the base plate
as shown. Align the holes in the base
plate, paving pad and clamp plate, and
secure it with bolts, spring washers and
flat washers.
ZIPPER MASCHINEN GmbH www.Zipper-Maschinen.at
ZI-RPE160C
ASSEMBLY
26