Receiving Traffic Announcements; Ta/Tp; Presetting Rds Stations With Af And Ta Setting - Sony CDX-L360 Bedienungsanleitung

Receiving traffic
announcements
By activating the Traffic Announcement (TA)
and Traffic Programme (TP). You can
automatically tune in an FM station
broadcasting traffic announcements. These
settings function regardless of the current FM
programme/source, CD; the unit switches
back to the original source when the bulletin is
over.
Press (TA) repeatedly until "TA-ON"
appears.
The unit starts searching for traffic
information stations.
"TP" indicates reception of such stations,
and "TA" flashes during an actual traffic
announcement. The unit will continue
searching for stations available with TP if
"NO TP" is indicated.
To cancel all traffic announcements, select
"TA-OFF" .
To Press
Cancel current (TA)
announcement
Tip
You can also cancel the current announcement by
pressing (SRC) or (MODE).
Presetting the volume of traffic
announcements
You can preset the volume level of the traffic
announcements so you won't miss hearing
them.
1
Press either side of the volume +/–
button to adjust the desired volume
level.
2
Press (TA) for 2 seconds.
"TA" appears and the setting is stored.
Receiving emergency
announcements
If either AF or TA is on, the unit will switch to
emergency announcements, if one comes in
while listening to an FM station or CD.

— TA/TP

Presetting RDS stations
with AF and TA setting
When you preset RDS stations, the unit stores
each station's AF/TA setting (on/off) as well
as its frequency. You can select a different
setting (for AF, TA, or both) for individual
preset stations, or the same setting for all
preset stations. If you preset stations with "AF
on" the unit automatically stores stations with
the strongest radio signal.
Presetting the same setting for all
preset stations
1
Select an FM band (page 10).
2
Press (AF) and/or (TA) to select "AF-ON"
and/or "TA-ON."
Note that selecting "AF-OFF" or "TA-OFF"
stores not only RDS stations, but also non-
RDS stations.
3
Press (SENS/BTM) until "BTM" flashes.
Presetting different settings for
each preset station
1
Select an FM band, and tune in the
desired station.
2
Press (AF) and/or (TA) to select "AF-ON"
and/or "TA-ON."
3
Press the desired number button until
"MEM" appears.
Repeat from step 1 to preset other stations.
Note
If you want to change the AF/TA setting while you
are playing a CD, press (AF) or (TA).
13