Assembly And Use Of The Carrycot - Emmaljunga NXT90 Gebrauchsanweisung

Assembly and use of the carrycot

1
2
3
4
5
84
Downloaded from www.Manualslib.com
ASSEMBLY OF THE CARRYCOT
• To assemble the carrycot pull the metal bar along the bottom of
• Pull one side at a time on each metal support so that both sides
• Repeat the same steps with the other end of the carrycot.
• This will set the carrycot into position.
WARNING
• Before using the carrycot ensure that the metal supports are
• Push back the backrest to the reclining position.
• Remove the mattress from the plastic bag (discard safely) The
• Insert the mattress.
WARNING
• Do not use additional mattresses in the carrycot. Use only the
• Risk of suffocation. Do not let children play with plastic bags.
• Press both buttons on the inside of the hood and pull it up.
• Attach the apron using the velco straps on each side of the
manuals search engine
the base until it clicks into one of the plastic pieces.
click in the plastic pieces.
clicked into all four parts on the botton of the base and the carry-
cot frame is held firmly in place.
bottom of the carrycot is made of wood.
Emmaljunga original mattress that comes with the pram.
carrycot
NXT 90 v 1.2