Service Protocol - Emmaljunga NXT90 Gebrauchsanweisung

UK
Service
Chassis/seat unit/carry cot function
Check the function of the chassis , that the two locking clips lock
properly on both sides.
Check that the seat/carrycot click on the chassis and it locks on both
sides.
Check the 5 point safety harness on the seat unit by checking that it
locks into place.
Check the telescopic height adjustment by lifting/pulling the handle
up and down, the handlebars should be checked that they lock in
each position.
Check that the back rest can be adjusted and locked into each
position.
Check that the footrest on the seat unit can be adjusted and locked
into each position.
Wheels and brakes
Attach the wheels and make sure that the wheels lock into
position.
Check that the parking device locks both rear wheels when
engaged.
Visual overview
Check that all rivets and screws are tightened correctly
Check that all press studs and zippers are intact and
correctly fastened
Check for any other visible deviations on the chassis, fabrics,
tray/basket and wheels
Lubrication
Clean and lubricate the wheels, axles, chassis locks, footrest
and the safety catch
Other notes (further adjustments or changed details)
NXT 90 v 1.2
Downloaded from www.Manualslib.com manuals search engine

Service Protocol

NXT 90
6 mon 12 mon 24 mon 36 mon
91