Bosch Rexroth IndraControl S67 Anwendungsbeschreibung Seite 87

DOK-CONTRL-S67PNBKDI8*-AP04-DE-P
Rexroth IndraControl S67 Profinet-Koppler 8 digitale Eingänge (M8)
Parameter
Preset input
Cam output
Tab. 11-21: Parametrierungsmöglichkeiten bei 2 Inkremental-Encoder (X3/X4)
Konfiguration: Counter at X3 und Incremental Encoder at X4
Parameter
Diagnosis: Undervoltage ULS
Diagnosis: Undervoltage UA
Field supply at X3/X4
Counter at X3
Diagnosis: Short circuit sensor supply
Counter mode
Bosch Rexroth AG
Parametrierung
Beschreibung
Encoder an X3:
deactivated
- DI Channel 0 at X1-A
- DI Channel 1 at X1-B
- DI Channel 5 at X3
Encoder an X4:
- deactivated
- DI Channel 0 at X1-A
- DI Channel 2 at X2-A
- DI Channel 7 at X4
Encoder an X3:
- deactivated
- DO Channel 0 at X1-A
- DO Channel 1 at X1-B
- DO Channel 2 at X2-A
Encoder an X4:
- deactivated
- DO Channel 0 at X1-A
- DO Channel 2 at X2-A
- DO Channel 3 at X2-B
Beschreibung
- disabled
- enabled
- disabled
- enabled
- 5 V
- 24 V
- disabled
- enabled
- Event counter
- Gate time/frequency measurement
- Gate time/period measurement
- Pulse duration measurement
- Pulse width ratio
85/143