Operation - OHAUS Ranger Count 4000 Serie Benutzerhandbuch

EN-2
2.3 Connecting Power
AC Installation
Connect the AC power cord to the instrument's power input connector, and then connect the AC plug to a suitable electrical
outlet.
Battery Power:
Allow the battery to charge for 12 hours before using the scale on battery power. The instrument can be operated during
charging, and the battery is protected against overcharging. For maximum operating time, the battery should be charged at
room temperature.
2.4 Levelling the Instrument
To level the instrument, adjust the feet so the bubble is centered in the circle of the level indicator. Be sure the equipment is
level each time its location is changed.
2.5 Initial Calibration
For best results, the instrument's calibration should be checked prior to first use. If adjustment is needed, refer to the
Calibration section of the instruction manual.

3. OPERATION

3.1 Overview of Display, Home Screen
Symbol Charge level
0 to 10 % Remaining
11 to 40 % Remaining
41 to 70 % Remaining
71 to 100 % Remaining
TM
RANGER COUNT 3000 SERIES