ECM Manufacture TECHNIKA V Profi PID Bedienungsanleitung Seite 34

4
Remove the shower screen and
the gasket completely.
7
Insert the shower screen into the
brew group.
10
Then, move the portafilter until
the shower screen is locked
firmly into the gasket.
The machine can be used again, as described in chapter 6 of the instruction manual.
The steam nozzle is blocked
Clean the holes of the steam nozzle carefully with a thin piece of metal such as a needle or a paper clip.
For this purpose, the steam nozzle may be unscrewed as well.
Important
Do not lose the small gasket situated between the steam nozzle and the thread!
Afterwards replace the steam nozzle.
Translation of the original German user manual
5
Keep the new spare parts ready
at hand (the rounded side of the
group gasket with ECM print
faced upwards to the brewing
group).
8
Take the portafilter without filter.
1.
Now you can easily lock the
portafilter into place.
6
Clean the group with a brush.
Lock the shower screen firmly
into the gasket.
9
Clamp the portafilter into the
brew group.
12
The group is ready for use.
ENGLISH
33