Connecting Antennas; Using External Antennas - Pioneer X-CM56 Bedienungsanleitung

Connections

Connecting antennas

• Connect the AM loop antenna and the FM (DAB/FM)
wire antenna as shown below.
• To improve reception and sound quality, connect
external antennas (see Using external antennas).
X-CM56
4
X-CM56D
1 Connect the AM antenna wires.
Holding the connector to connect.
2 Fix the AM loop antenna to the attached
stand.
Set up as illustrated above.
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
• Place the antenna near a window, etc. for the best
reception.
• Do not place the antenna near a computer or TV. It may
result in noise.
4 Connect the FM (DAB/FM) wire antenna into
the FM antenna socket.
For best results, extend the FM (DAB/FM) antenna fully and
fix to a wall or door frame. Don't drape loosely or leave coiled
up.

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external
FM (DAB/FM) antenna.
2
3
1
2
3
1
One-touch PAL
connector
75  coaxial
cable
03
X-CM56
X-CM56D
11
En