Connecting Antennas; Using External Antennas - Pioneer X-HM15-K Bedienungsanleitung

Connections

Connecting antennas

X-HM15/HM15BT
Connect the AM loop antenna and the FM wire antenna as
shown below. To improve reception and sound quality,
connect external antennas (see Using external antennas
below).
fig. a
ANTENNA
AM
4
LOOP
FM
UNBAL
75 Ω
1 Connect the AM antenna wires.
Hold the terminal part of the wire when connecting.
2 Fix the AM loop antenna to the attached
stand.
To fix the stand to the antenna, bend in the direction indicated
by the arrow (fig. a) then clip the loop onto the stand (fig. b).
3 Place the AM antenna on a flat surface and
in a direction giving the best reception.
4 Connect the FM wire antenna into the FM
antenna socket.
For best results, extend the FM antenna fully and fix to a wall
or door frame. Don't drape loosely or leave coiled up.
fig. b
2
1
3
X-HM15BTD
Connect the DAB/FM wire antenna as shown below. To
improve reception and sound quality, connect external
antenna (see Using external antennas below).
1 Connect the DAB/FM wire antenna into the
DAB/FM antenna socket.
For best results, extend the DAB/FM antenna fully and fix to a
wall or door frame. Don't drape loosely or leave coiled up.

Using external antennas

To improve FM reception
Use a PAL connector (not supplied) to connect an external FM
antenna.
75 coaxial
cable
ANTENNA
DAB/FM
One-touch PAL
connector
ANTENNA
FM
UNBAL
75 Ω
03
11
En