Storage; Troubleshooting - Silvercrest SKKM 200 A1 Bedienungsanleitung

1) If the appliance is still plugged in, remove the
power plug from the mains power socket.
2) Turn the coffee bean container 2 anticlockwise
until the ▼ arrow on the coffee bean container
2 is above the
Pull the coffee bean container 2 upwards and
off the appliance.
3) Remove the lid 1 from the coffee bean container
2. The cleaning brush q is stored beneath the
lid 1.
4) Pull the upper part of the grinding mechanism 4
upwards out of the appliance and pull off the
silicon ring 3.
5) Clean the upper and lower parts of the grinding
mechanism 4/5 as well as the output
opening 7 using the cleaning brush q.
NOTE
► During the grinding process, coffee fat is
produced, which creates residue in the
grinding mechanism 4/5 over time. Coffee
fat and coffee powder residue must be
removed at regular intervals with the cleaning
brush q to ensure an optimum grinding result.
6) Wash the coffee bean container 2 together
with its lid 1, the coffee powder container r
together with its lid e, the portafilter holder w,
the cleaning brush q and the silicon ring 3
in lukewarm washing up water. Rinse with fresh
water to remove all detergent residue, and dry
all parts thoroughly.
NOTE
The coffee bean container 2
►
together with its lid 1, the coffee
powder container r together with
its lid e and the portafilter holder w can also
be washed in the dishwasher. If possible,
place all the parts in the upper basket of the
dishwasher and make sure that they are not
jammed in place.
■ 20 │ GB │ IE
symbol on the appliance.
7) Clean the surfaces of the appliance with a
damp cloth. For stubborn dirt, add some mild
detergent to the cloth. Afterwards, wipe with a
cloth moistened only with water to remove all
detergent residue. Ensure that the appliance is
completely dry before using it again.

Storage

1) Always wipe the appliance down thoroughly
before storing as described in the section
"Cleaning".
2) Wind the power cable around the cable
retainer 8 in an anticlockwise direction. Guide
the end of the power cable with the plug
through the recess on the housing.
3) Store the appliance in a clean, dry location.

Troubleshooting

The appliance is not working.
The coffee bean container 2 has not been
■
correctly inserted.
Check that the coffee bean container 2 is
♦
correctly positioned (see section "Starting up
the appliance").
The dial 9 is set to the OFF position.
■
♦ Set the required coffee powder quantity (see
section "Setting the coffee powder quantity").
■ The power plug is not connected to the mains
power.
♦ Insert the plug into a mains power socket.
■ The mains power socket is defective.
♦ Use a different mains power socket.
■ The appliance is defective.
♦ Contact Customer Service (see section "Service").
SKKM 200 A1