Cleaning And Care; Storage; Disposal - Silvercrest SKMS 150 A1 Bedienungsanleitung

When grinding espresso beans, proceed exactly as
described in the section "Grinding coffee beans for
filter coffee" and use the following guide values .
Use the following guide values to help you:
–
18 g (approx . 2 tbsp .) of espresso beans
for 2 cups of espresso .
–
36 g (approx . 4 tbsp .) of espresso beans
for 4 cups of espresso .

Cleaning and care

RISK OF ELECTRIC SHOCK
► Always remove the plug from the mains power
socket before you clean the appliance .
Never immerse the appliance's motor unit
2 in liquid, and never allow liquid to enter
the motor unit housing 2 .
WARNING! RISK OF INJURY!
► Take great care when handling the blade 4 .
It is extremely sharp!
♦ Clean the interior of motor unit 2 after every
use with a dry, soft cloth or the cleaning brush 6 .
♦ Clean the outside of the motor unit 2 with a
moist cloth after every use . For stubborn dirt,
add some mild detergent to the cloth . Rinse
detergent residues off with fresh water . Ensure
that there are no detergent residues on the
appliance, and that the appliance is completely
dry before using it again .
♦ Rinse the lid 1 in lukewarm water with a little
detergent in it .
♦ Ensure that all detergent residues have been
removed and that the lid 1 is completely dry
before you reuse the appliance .
■ 6 │ GB │ IE │ NI │ CY

Storage

♦ Always wipe the appliance down thoroughly
before storing .
♦ Wrap the power cable around the cable
retainer 5 . Guide the end of the power cable
with the plug through the recess on the housing .
♦ Store the appliance in a clean and dry location .

Disposal

Never dispose of the appliance
in normal domestic waste . This
product is subject to the
provisions of European
Directive 2012/19/EU .
Dispose of the appliance through an approved
disposal centre or at your community waste facility .
Please observe the currently applicable regulations .
Please contact your waste disposal centre should
you be in any doubt .
Your local community or municipal
authorities can provide information on
how to dispose of the worn-out
product .
The packaging is made from
environmentally-friendly material and
can be disposed off at your local
recycling plant .
Dispose of the packaging in an
environmentally friendly manner .
Note the labelling on the packaging
and separate the packaging material
components for disposal if necessary . The packaging
material is labelled with abbreviations (a) and
numbers (b) with the following meanings:
1–7: Plastics, 20–22: Paper and cardboard,
80–98: Composites
SKMS 150 A1