Operation; Selecting The Grind Setting; Setting The Coffee Powder Quantity; Using The Coffee Powder Container - Silvercrest SKKM 200 A1 Bedienungsanleitung

Operation

ATTENTION! PROPERTY DAMAGE!
► After operating the appliance for 3 minutes,
allow it to cool down for at least 30 minutes.
NOTE
► It is best to always freshly grind your coffee
beans before use. Pre-ground coffee powder
quickly loses its aroma.
► You can stop the grinding process at any
time by pressing the start/stop button
Pressing the start/stop button
will start a new grinding process.

Selecting the grind setting

You can use the different grinder settings to adjust
the grain size of the coffee powder.
NOTE
► Please also note the information about
suitable powder fineness in the operating
manual of your coffee machine.
► The suggested grind settings are for guidance
only. The ideal grind setting depends, for
example, on the type of bean, the roast or
your personal preferences. You should
therefore try out the various options to find the
optimum grind setting for your purposes.
1) Turn the coffee bean container 2 until the ▼
arrow on the coffee bean container 2 is above
the desired grind setting on the scale for
adjusting the grind setting 6. You can choose
from 35 grinding settings:
–
Select a fine grind from 1‒14 if you wish to
use the ground coffee for a standard espresso
machine with a portafilter.
–
Select a medium grind from 15‒25 if you
want to prepare filter coffee (drip/pour over).
–
Select a coarse grind from 26‒35 if you want
to prepare coffee in a cafetière (French press).
■ 18 │ GB │ IE
Setting the coffee powder quantity
NOTE
►
►
0.
0 again
♦ You can set a coffee powder quantity for 1‒14
cups. Select the required quantity with the dial 9.
Using the coffee powder container
1) Open the rubber closure in the lid e of the
coffee powder container r by turning it to one
side.
2) Push the coffee powder container r into the
appliance beneath the output opening 7 so
that it is resting securely in the round recess.
3) Press the start/stop button
grinding process. The grinding process stops
automatically as soon as the set quantity of
coffee powder is reached.
NOTE
►
The cup numbers next to the dial 9 are for
orientation purposes only. The amount of
coffee powder ground per cup depends on
the type of bean, the roast and the grinding
setting used. The finer the grind, the less coffee
powder comes out per cup and vice versa.
The amount of coffee powder you need to
make a cup of coffee depends, for example,
on the type of bean, the roast, the grind
setting used, the cup size and your personal
preferences. Try out which combination of
bean type, grind setting and coffee powder
quantity is the most suitable for your purposes.
Before removing the coffee powder container
r, tap gently on the housing in front of the
output opening 7 so that any loose coffee
powder residue falls into the coffee powder
container r.
0 to start the
SKKM 200 A1