Using The Portafilter Holder; Cleaning - Silvercrest SKKM 200 A1 Bedienungsanleitung

4) If you grind a large quantity of coffee beans,
keep an eye on the fill level of the coffee powder
container r. If necessary, remove it between
grinding operations and shake it a little to
distribute the coffee powder evenly. Replace the
coffee powder container r in the housing and
press the start/stop button
grinding process.
As soon as the MAX mark in the coffee powder
container r is reached, it must be emptied.
5) Once you have ground enough coffee beans,
turn the dial 9 to the OFF position and remove
the mains plug from the socket.
Using the portafilter holder
If you use a espresso machine with a portafilter
to prepare your coffee, you can fill the portafilter
directly with coffee powder. The portafilter holder
w is suitable for portafilters with an outer diameter
of approx. 60 mm (without wings).
1) Push the portafilter holder w as far as it will go
into the guide rails next to the output opening 7
with the opening facing forwards. Then slide the
portafilter between the guide rails of the
portafilter holder w.
2) Use the dial 9 to set a coffee powder quantity
of 1‒2 cups. Refer to the operating instructions
of your espresso machine for the required
quantity.
SKKM 200 A1
0 to start a new
3) Press the start/stop button
grinding process. The grinding process stops
automatically as soon as the set quantity of
coffee powder is reached.
4) Remove the portafilter and compact the coffee
powder with a stamp/tamper or coffee spoon.
5) If the required fill level has not yet been reached,
push the portafilter back into the portafilter
holder w and start a new grinding process.
Stop the grinding process by pressing the start/
0. Finally, compact the coffee
stop button
powder again with a tamper or coffee spoon.
6) Once you have ground enough coffee beans,
turn the dial 9 to the OFF position and remove
the mains plug from the socket.

Cleaning

RISK OF ELECTRIC SHOCK
► Before cleaning the appliance, always pull
out the plug from the mains power socket.
► Never immerse the appliance in water
or other liquids!
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive or aggressive cleaning
materials. These can irreparably damage
the surfaces!
Do not moisten the grinding mechanism 4/
►
5 to clean it!
NOTE
► If there are still coffee beans in the coffee
bean container 2, do not simply remove it in
order to empty it out completely. The coffee
beans would fall out of the coffee bean
container 2. Instead, remove the lid 1 and
pour the beans into a large bowl, for example.
Keep them in an airtight container to preserve
the aroma.
0 to start the
GB │ IE │
19 ■