Air Conditioning - HP Latex 700 Serie Einführende Informationen

If your hair is long, try to secure it so that it will not fall into the printer.
●
Take care that sleeves or gloves do not get caught in the printer's moving parts.
●
Avoid standing close to the fans, which could cause injury and could also affect print
●
quality (by obstructing the air flow).
Do not touch gears or moving rolls during printing.
●
Do not operate the printer with covers bypassed.
●
Ensure that nobody else is close to the printer while loading substrate.
●
Ensure that the carriage has stopped in the service station before you open the
●
printzone window, the carriage door, or lift the curing module.
Light radiation hazard
Light radiation is emitted from the illumination of the print zone.
This illumination is in compliance with the requirements of the exempt group of IEC
62471:2006: Photobiological safety of lamps and lamp systems. However, you are
recommended not to look directly at the LEDs while they are on. Do not modify the
module.
Chemical hazard
Safety data sheets are available.
See the safety data sheets available at
chemical ingredients of your consumables. Sufficient ventilation needs to be provided to
ensure that potential airborne exposure to these substances is adequately controlled.
Consult your usual air conditioning or EHS specialist for advice on the appropriate
measures for your location.
For more detailed information, see the Ventilation and Air conditioning sections included in
the Site Preparation Guide, available at:
www.hp.com/go/Latex800series/manuals.
Ventilation
Fresh air ventilation is needed to maintain comfort levels.
Ventilation should meet local environmental, health, and safety (EHS) guidelines and
regulations. Follow the ventilation recommendations in the Site Preparation Guide.
NOTE: The ventilation units should not blow air directly onto the printer.

Air conditioning

In addition to fresh air ventilation to avoid health hazards, consider also maintaining
workplace ambient levels by ensuring the climatic operating conditions (specified in the
user guide) to avoid operator discomfort and equipment malfunction. Air conditioning in
the work area should take into account that the printer produces heat.
Typically, the printer's power dissipation is 4 kW (13.7 kBTU/h).
4 HP Latex 700 & 800 Printer Series
http://www.hp.com/go/msds
www.hp.com/go/Latex700series/manuals
to identify the
and
ENWW