Air Conditioning - HP Stitch S1000 126in Einführende Informationen

Heavy substrate hazard
Special care must be taken to avoid personal injury when handling heavy substrates.
Handling heavy substrate rolls always requires two people. Care must be taken to avoid back strain and/or
●
injury.
Always use a forklift, pallet truck, or other handling equipment to lift substrates. The printer has been
●
designed to be compatible with many of these devices.
Always wear personal protective equipment including boots and gloves.
●
Ink handling and condensates
HP recommends that you wear gloves when handling ink system components and condensates.
Ventilation
Fresh air ventilation is needed to maintain comfort levels. Ventilation should meet local environmental, health, and
safety (EHS) guidelines and regulations. Follow the ventilation recommendations in the site preparation guide,
available at: http://www.hp.com/go/StitchS1000126in/manuals.
The ventilation units should not blow air directly onto the printer.
NOTE:

Air conditioning

In addition to fresh air ventilation, to avoid health hazards, also consider maintaining workplace ambient levels by
assuring the climatic operating conditions specified in this document (see
on page 9) to avoid operator's discomfort and equipment malfunction. Air conditioning in the work area should
take into account that the equipment produces heat. Typically, the printer's power dissipation is 6.0 kW (20.5
kBTU/h).
Air conditioning should meet local environmental, health, and safety (EHS) guidelines and regulations.
The air conditioning units should not blow air onto the equipment.
NOTE:
Printer software
The HP Internal Print Server is provided with your printer and is already installed in the printer's built-in computer. It
displays printer alerts and a summary of printer status, manages print jobs, and must be used to interact with the
printer in various ways.
The HP Print Care program is provided with your printer and is already installed in the printer's built-in computer. It
displays printer status and history in detail, and helps you to maintain the printer and solve any problems that may
arise.
A Raster Image Processor (RIP) should be run on a separate computer; it cannot be installed on the printer's built-in
computer. It is not provided with the printer and should be obtained separately.
Printer messages
Occasionally you may see messages such as the following in the Internal Print Server window. There are two types:
text messages, which are more informative, and messages containing numerical codes, which mean that the printer
has detected a problem or malfunction. When one of these messages appears, please follow any instructions
provided by the printer, and consult the table below. If you feel in doubt about the correct response, or if you have
followed the recommendation but the problem persists, call your service representative.
Message or code
[Color] cartridge has expired
ENWW
Recommendation
Replace the cartridge.
Environmental specifications
5