Service Data - Leonard LBN1114X Benutzerinformation

10.4 How to replace: Lamp
WARNING!
Risk of electric shock.
The lamp can be hot.
Step 1
Turn off the oven. Wait until the
oven is cold.
Back lamp
Step 1
Turn the glass cover to remove it.
Step 2
Clean the glass cover.
Step 3
Replace the lamp with a suitable 300 °C heat-resistant lamp.
Step 4
Install the glass cover.
11. TROUBLESHOOTING
WARNING!
Refer to Safety chapters.
11.1 What to do if...
In any cases not included in this table please
contact with an Authorised Service Centre.
Problem
The oven does not
heat up.

11.2 Service data

If you cannot find a solution to the problem yourself, contact your dealer or an Authorised
Service Centre.
The necessary data for the service centre is on the rating plate. The rating plate is on the front
frame of the oven cavity. Do not remove the rating plate from the oven cavity.
We recommend that you write the data here:
Model (MOD.)
32 ENGLISH
Before you replace the lamp:
Step 2
Disconnect the oven from the
Check if...
The fuse is blown.
mains.
Problem
The door gasket is
damaged.
The lamp does not
work.
.........................................
Step 3
Put a cloth on the bottom of the
cavity.
Check if...
Do not use the oven.
Contact an Authorised
Service Centre.
The lamp is burnt out.