Replacing The Line Spool; Care And Maintenance; Faults; Waste Disposal - EINHELL Royal ES 1000 Originalbetriebsanleitung

Anleitung_ES_1000_SPK1:Anleitung ES 1000_SPK1
objects to prevent unnecessary wear on the
line.
Please note
Maximum speed is reached approx. 1 to 2
seconds after activating the ON/OFF switch.
The motor speed may fluctuate during
operation.
This is because the tool comes with a
speed adjustment feature which takes
account of changing loads during
operation.

9. Replacing the line spool

Important.
Make sure that you pull out the power plug
before exchanging the line spool!
Undo the fixing screw (12) by turning it
counter-clockwise (Fig. 13).
Remove the spool (11) (Fig. 14)
Thread the ends of the line on the new line
spool through the eyelets (A) and insert the
spool. Tighten the fixing screw (12) by
turning it clockwise (Fig. 15).
Caution!
Pieces of nylon line may cause injury when
flung out.

10. Care and maintenance

Before putting away or cleaning the tool,
switch off and pull out the power plug.
Use a brush to remove deposits from the
safety guard.
Clean the plastic body and other plastic
parts with a mild household cleaning agent
and a damp cloth.
Do not use any aggressive agents or
solvents for cleaning purposes.
Never clean the scythe by spraying with
water. Prevent water getting inside the
machine at all costs.
26.08.2009 15:35 Uhr

11. Faults

The machine does not work: Check that the
power cable is connected properly and
check the mains fuses. If the machine will
not work in spite of the voltage supply
being OK, please send it to the specified
after-sales service address.

12. Waste disposal

Please note
The electric scythe and its accessories are
made of various types of material, such as
metal and plastic.
Defective components must be disposed of
as special waste.
Ask your dealer or your local council.

13. Ordering replacement parts

Please quote the following data when ordering
replacement parts:
Type of machine
Article number of the machine
Identification number of the machine
Replacement part number of the part
required
For our latest prices and information please go
to www.isc-gmbh.info
- Spare line spool
Art. No. 34.051.80
Seite 17
GB
17