Connecting The Touch Display - 3M Multi-Touch C3266PW Bedienungsanleitung

281

Connecting the Touch Display

C4267PW
C4667PW
C5567PW
C3266PW
Downloaded from www.Manualslib.com
Note: Please be warned that any change or modification to the equipment, not expressly
approved by the party responsible for compliance, could void your warranty.
To connect the Multi-Touch Chassis Display:
1. Turn off the computer before connecting or disconnecting the touch display.
AC Remote
Input OSD
Power
USB
Switch
Touch
AC
Input
Power
USB
Switch
Touch
2. Select the appropriate video cable: Display Port, HDMI, DVI, or VGA. Connect one
end of the video cable to the video connector on the display. Connect the other end to
the video card in your computer.
3. Connect one end of the USB touch sensor cable to the LCD and the other end to an
available port on your computer. For the C3266PW display you also have the option
of connecting to the RS-232 Serial communication ports instead of the USB port.
Note: Do not connect both USB and Serial cables on the display. Choose one or the other.
4. Connect the power cable to an appropriate grounded power source.
3M Touch Systems, Inc. Proprietary Information
manuals search engine
3M™ Multi-Touch Chassis Display User Guide
RS-232
OUT IN
Display
Port
Serial
RS-232
Touch
OUT IN
Display
Port
VGA
HDMI
Port
Port
DVI Audio
Port
HDMI VGA
Port Port
DVI
Port
Audio