3M Multi-Touch C3266PW Bedienungsanleitung Seite 291

289 3M™ Multi-Touch Chassis Display User Guide
Auto Configure
Performs automatic configuration of the Clock, Phase, Vertical and Horizontal positions.
If you run Auto Configure, the display will try to find the best setting. If you are not
satisfied with the auto adjustment settings, you may fine-tune the settings manually as
described below.
Phase
Adjust this setting so that either the vertical bars of video noise are replaced by an even
amount of noise across the whole screen, or the noise disappears completely.
Clock
If the clock setting is not fine-tuned, you may observe periodic vertical bars of video
noise on your image. These bars of noise are usually removed when an Auto Adjust is
performed. If the bars of noise are still present, this setting can be adjusted manually.
3M Touch Systems, Inc. Proprietary Information
Downloaded from www.Manualslib.com manuals search engine