Clearance And Ventilation; Video Card Requirements; Using The Standard Controls For The Video Card; Supported Video Display Modes And Refresh Rates - 3M Multi-Touch C3266PW Bedienungsanleitung

12

Clearance and Ventilation

Video Card Requirements

Using the Standard Controls for the Video Card

Supported Video Display Modes and Refresh Rates

Downloaded from www.Manualslib.com
Leave at least two inches of clearance space behind the Multi-Touch Chassis Display for
proper ventilation. Units have vent holes at the top and bottom on the back of the chassis
-- ensure these holes are not blocked during installation. Always maintain adequate
ventilation to protect the display from overheating and to ensure reliable and continued
operation.
Note: Be sure to leave at least 2 inches clearance around fan inputs.
Refer to the published specifications for the maximum and minimum operating
temperature and humidity conditions. Refer to the product data sheet on the 3M Touch
Systems website at http://www.3m.com/touch/.
Confirm your computer has a video card that supports the native video resolution of 1920
x 1080 for the Multi-Touch Chassis Display.
In addition to the standard controls on the display, each video card has several controls
that let you adjust the display settings. The software and driver for each video card is
unique. In most cases, you adjust these settings by using a program or utility provided by
the manufacturer of the video card.
Your video card should support one of the display modes specified below. If you select
an unsupported mode, the display may stop working or display an unsatisfactory image.
Display Mode
640 x 480
800 x 600
1024 x 768
1152 x 864
1280 x 720
1280 x 768
1280 x 960
1280 x 1024
1360 x 768
1366 x 768
1600 x 1200
1680 x 1050
1920 x 1080
3M Touch Systems, Inc. Proprietary Information
manuals search engine
3M™ Multi-Touch Chassis Display User Guide
Refresh Rate (Hz)
60
60
60
70
60
60
60
60
60
60
60
60
60