Technical Specifications; Acoustic Signals; Warning Lights; Functionality - Elkron HPA800 Installations-Handbuch

5.0 TECHNICAL SPECIFICATIONS

5.1 ACOUSTIC SIGNALS

Sound pressure:
Modulations:
Timings:
Diagnostic signals:
Service signals:

5.2 WARNING LIGHTS

Flashing light:
Diagnostic signals:
Service signals:

5.3 FUNCTIONALITY

Alarm input:
System status input:
Alarm cycle block:
Anti-foam protection active:
Tamper output:

5.4 POWER SUPPLY

Power voltage:
Low battery voltage:
Battery housing:
Stand-by consumption:
Maximum consumption:

5.5 MECHANICAL STRUCTURE

Dimensions:
Weight:
Casing material:
Working temperature range:
Degree of protection:
Shock resistance:
114 dbA at 1 meter (main axis)
2 selectable sound types (sinusoidal 1400-2300 Hz, sawtooth
1400-1860 Hz)
240 s – 480 s
Power on
Confirm inputs OK
End of installation
ON (on confirmed)
OFF (off confirmed)
4+1 high efficiency multifunctional LEDs
Power on
View tamper / anti-foam protection status
View alarm input status (lock)
Confirm inputs OK
End of installation
Change in system status (switch-on/off completed)
System on status on dedicated LED
Alarm memory / tamper / anti-foam protection
Selectable polarity
Selectable balance
Selectable polarity
Status (on/off) selectable
Selectable balance
In 24h (max. 8 cycles)
In an ON session (max. 8 cycles)
Only if present option GRI/HPA800
NC free contact
10.5 - 14.4 Vdc (13.8 V nominal)
< 10.5 V
Sealed Pb 12 V 2.2 Ah
26 mA
1.6 A
215 x 270 x 90 mm
1190 g
ABS / ASA / PC
-25°C / +55°C
IP44
IK08 (5 Joule)
36/52
HPA800