2.3 ANTI-FOAM GRID MOUNTING
To mount the option GRI/HPA800, grid with anti-
foam active, connect the yellow wire connecting
the anti-foam module housed in the intermediate
cover (C) to the FOAM connector of the siren
board.
Fix the intermediate cover (C) to the bottom (B)
using the 4 captive screws (D) already present.
2.4 TEMPORARY COVER ATTACHMENT
During installation, the cover (E) can be temporarily hooked to
the closing screw (loosened by about 4 mm) located on the
bottom (B).
In this way, your hands will be free to configure and connect the
siren.
28/52
HPA800