Assembly - HOLZMANN-MASCHINEN WB106MINI Montageanleitung

9.3

Assembly

Assembly of drawer
HOLZMANN MASCHINEN GmbH www.holzmann-maschinen.at
1. Insert Connection Nuts (No.8) into holes at
end of frame brace (No.3). Make sure that
the slot on the nuts align horizontally with
the bolts (No.7).
2. Set the Frame brace (No.3) against a Leg
(No.4) and use the Hex Wrench (No 9) and
bolt (No.7) to fasten frame brace and leg
together.
3. Once both legs (no.4) have been fastened to
the frame brace (No.7) slide the shelf (No.2)
inside.
4. Set the second frame brace (No.3) on, and fix
it with the connection nuts (No.8) and screw
(No.7) onto the leg (No.4). Make sure that
the shelf is placed inside the grooves of the
frame braces.
a. Assemble the components as shown and
secure with screws.
ASSEMBLY
13
WB 106 MINI