Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Before Use -Disassembly and assembly of the parts-
The following steps show how to detach / attach attachments, using the juice attachment as
●
■
an example.
The frozen cone can be detached / attached in the same method.
To disassemble
1
Remove the
juicing bowl
from the motor
housing.
2
Remove the juice attachment.
Squeezing screw comes out with it.
●
■
Squeezing
screw
3
Remove the parts.
Juice cone
Rotating
brush
GB12
Disassembling / Assembling attachments
1
●
●
(
)
Frozen cone
●
See page GB20 for how to install the
gasket, rubber plug and rubber brushes.
(
)
●
Frozen cone
Make sure the gasket, rubber
plug and rubber brushes are
in place correctly.
Gasket is located in the juicing bowl.
■
Top view
Rubber plug is located on the outer
■
bottom.
Push it in until
no gap.
Outer bottom view
Rubber brushes are located at side
■
of the rotating brush.
The juicer may not work properly if
■
they are not assembled correctly.
Werbung
Inhaltsverzeichnis
