Power Off; Cleaning Mode Selection - ECOVACS ROBOTICS Deebot R98 Benutzerhandbuch

Power OFF

9
Open the robot's Top Cover. Move the Power
Switch to the "O" position to power OFF.
When DEEBOT is not working, it is suggested to keep it powered ON and charging.
*
DEEBOT loses its map once it is powered OFF. It is suggested to keep DEEBOT powered ON
*
if it remains in the same home environment.
In case DEEBOT is powered OFF, to restore the map in the same home environment, power
*
ON DEEBOT and follow the instructions on ECOVACS App.

3.3 Cleaning Mode Selection

DEEBOT has several Cleaning Modes to choose from to effectively clean different floors. Cleaning
Modes are selected using the ECOVACS App or using the AUTO Mode Button on the robot's
Control Panel.
1 AUTO Cleaning Mode
This is the most commonly used mode. In AUTO Cleaning Mode, DEEBOT cleans in a back and
forth straight-line pattern.
To start AUTO Cleaning Mode, press the
AUTO Mode Button on the robot or
the App.
3. Operating and Programming
on
15
EN